SMD-RF06
SMD-RF06 is one of smart IOT smoke detectors which is using photoelectric smoke detection technology. The principal of photoelectric smoke detection is that usually the light receiver inside smoke detector will continuously receive light from emitter, however, while smoke come inside detector, partial of light received will be blocked by smoke，and while the light volume is getting lower under an alarm limit, alert will be issued immediately.
Normally, when regular houses or buildings were under construction, based on Fire Regulations, they must design and install one or more smoke detectors on the ceiling in kitchen or other place with heat equipment，and then link with home security master to push an alert to host fire receiver in the community or building to avoid fire expanding and spreading.
SMD-RF06 makes people only use an APP on smartphone or pad to monitor if smoke or even fire occurred or not, and it is just offers a no re-decoration required、fast installation and wireless transmission option to enhance self-rescue power and home security level, not intend to replace or instead existed smoke detectors.
SMD-RF06 needs a DC 9V alkaline battery as power supply and use retardant ABS to make its case. There is a LED lamp on the top cover, while a blink on it every 40 seconds, means Monitoring; and a fast blink with buzzer every 0.5 second stands for smoke is over alarm limit or fire is happening. Fire alert is issued if smoke is continuously blocking received light more than 15% for 30 seconds.
Normally, when regular houses or buildings were under construction, based on Fire Regulations, they must design and install one or more smoke detectors on the ceiling in kitchen or other place with heat equipment，and then link with home security master to push an alert to host fire receiver in the community or building to avoid fire expanding and spreading.
SMD-RF06 makes people only use an APP on smartphone or pad to monitor if smoke or even fire occurred or not, and it is just offers a no re-decoration required、fast installation and wireless transmission option to enhance self-rescue power and home security level, not intend to replace or instead existed smoke detectors.
SMD-RF06 needs a DC 9V alkaline battery as power supply and use retardant ABS to make its case. There is a LED lamp on the top cover, while a blink on it every 40 seconds, means Monitoring; and a fast blink with buzzer every 0.5 second stands for smoke is over alarm limit or fire is happening. Fire alert is issued if smoke is continuously blocking received light more than 15% for 30 seconds.